Installing a Transaction Printer

The printers can connect through a USB connector or an RS-232 connector.

USB Installation

Connect the Powered USB Printer Interface Cable to the USB Connector and Power Connector on the printer and to the 24 V Powered USB Connector on the terminal.

RS-232 Installation

1.Connect the RS-232 Printer Interface Cable to the RS-232 connector on the printer and to a non-poweredRS-232 connector on the terminal.

Note:  The factory default setting for the RS-232 ports is powered. See the Appendix: Powered Serial Port Settings.

2.Connect the Powered USB Printer Interface Cable to the Power Connector on the printer and to the 24V Powered USB Connector on the terminal.